|
Discontinued.Clod.Parts
|  |  17 inch aluminum 50/50 4-link kit. | |
|
| |  The very popular Terminator Race chassis by CPE! Available in your choice of aluminum or carbon fiber! | |
|
| |  Tired of breaking your stock plastic servo savers? Add our aluminum steering linkage kit and eliminate breakage and sloppy steering on your stock Clodbuster. This kit includes two complete sets of aluminum steering linkages (enough for one complete truck). | |
|
| |  hese wheel adapters allow for the use of any 14mm hex drive wheel on your Clodbuster crawler. CNC machined from 6061 aluminum, these spacers allow for the use of the stock 12mm drive hex and provide a 1" offset per side. | |
|
| |  Use these wheel spacers to extend your Clodbuster axles 3/4" per side. These CNC machined 6061 aluminum spacers allow for the use of the stock drive hex, provide a 3/4" offset per side, and work with any wheel having a 12mm hex drive system (2.2 sized wheels). | |
|
| |  CPE is now offering a CNC machined 3/4" offset wheel spacer for your Clodbuster. This design still allows for the use of the stock drive hub and wheel, but eliminates having to drill a hole pattern in your wheel. This kit also provides the added width necessary for high-speed stability. | |
|
| |  This is our brand new, improved Clodbuster Sniper aluminum race chassis. The main chassis will arrive fully assembled and will include our aluminum 13.5" WB race 4-link kit. The new bare chassis weighs in at only 7 oz, identical to our original Sniper chassis. Better still, we were able to design the chassis to handle dual battery packs or even LiPo batteries while lowering the center of gravity. | |
|
| |  This is our brand new, improved Clodbuster Sniper aluminum race chassis. The main chassis will arrive fully assembled and will include our aluminum 13.5" WB race 4-link kit. The new bare chassis weighs in at only 7 oz, identical to our original Sniper chassis. Better still, we were able to design the chassis to handle dual battery packs or even LiPo batteries while lowering the center of gravity. | |
|
| |  This lightweight 13” wheelbase chassis was designed with racing in mind and has a much lower center of gravity than our Evolution chassis as well as the stock Clodbuster frame. | |
|
| |  This chassis center is designed to lower the center of gravity of your Clodbuster for race applications. This chassis allows for multiple battery pack configurations. This chassis was developed as an entry-level kit for competitive racing and does not have the suspension articulation our Evolution chassis has. Our Sniper chassis is extremely lightweight and is constructed using 0.080" thick side plates. | |
|
| |  This high quality stainless steel mount allows for multiple servo mounting configurations depending on your application. This design maintains the mounting points on the stock Clodbuster axle tubes. We've also allowed for the installation of the ESC or split battery pack on the top side of the mount. | |
|
| |  This bracket mounts directly to your gearbox support arms with the included hardware. | |
|
| |  These are laser cut to duplicate the look of the real beadlock rings used on the full-size monsters. These fit inside the outer rib on the stock Clodbuster or TXT wheel and glue directly to the wheel. | |
|
| |  CPE is proud to introduce our new planetary hub covers for the Clodbuster. We wanted to add a touch of realism to the Clodbuster wheel, without redesigning the entire wheel. These are a perfect compliment when used with our CPE-RNG10 replica beadlock ring! Both current race trucks as well as that stock "Retro Class" Clodbuster look great with these added for realism. | |
|
| |  Increased high speed stability. | |
|
| |  This hitch is designed as a bolt-on to your Clodbuster and allows for a infinitely adjustable hitch location. The supplied hardware also provides the lockout of your rear steering. The increased height adjustments allow you to custom tune your hitch height depending on track conditions. | |
|
| |  High clearance 6061 aluminum 4-link bars designed to optimize ground clearance for your crawler. | |
|
| |  Get all of the parts needed for your Clodbuster project in one convenient package! | |
|
| |  This fully assembled package combines our center chassis and 4-link suspension arm kit | |
|
| |  Fully assembled and constructed from 1/8" aluminum, the chassis allows for multiple shock and suspension mounting locations. Extremely compact and lightweight, this chassis allows for maximum suspension travel and axle articulation. | |
|
| |  A must-have for the serious rock crawler! These differential lockers are designed to lock your Clodbuster axle for maximum traction over any surface. Our kit replaces the BG1 and BG3 gears in your gearbox and is easily interchangeable with your stock gears so you can go from locked to unlocked quickly. CNC machined from 6061 aluminum, there are no plastic/delrin hexes to wear out over time. | |
|
| |  The Claw chassis uses an innovative suspension design that allows up to 80 degrees of articulation without the use of shocks. The chassis as pictured has a 17" wheelbase with 4.5" of center chassis clearance. The complete chassis with body mounts and suspension including links weighs in at only 12.5 ounces! | |
|
| |  Clodbuster BTA (Behind the axle) steering kit for both crawlers and racers. This kit combines our CPE-SER2 stainless steel servo mounting bracket with a heavy-duty stainless steel cross-bar. No more snapping the bar that comes with some other kits! | |
|
| |  Enhances look of your Clodbuster. Give your clod that oldschool look! | |
|
| |  17 Inch Wheelbase Kit (60/40). Get all of the parts needed for your Clodbuster crawler project in one convenient package! Our innovative Claw complete rock crawler chassis kit starts with our 17" Wheelbase Claw Shockless Crawler Chassis with a 60/40 chassis placement | |
|
| | 17 Inch Wheelbase Kit (50/50). The brand new Claw chassis uses an innovative suspension design that allows up to 80 degrees of articulation. The chassis as pictured has a 17" wheelbase with 4.5" of center chassis clearance. | |
|
| |  Add these Terminator style skull 4-link mounts to your truck for that unique look! These mounts use the stock steering servo location and give that different look for those not wanting to run our high performance CNCd CPE-4LMTHD versions. | |
|
| |  These aluminum upper 4-link mounting brackets are a direct bolt-on to your stock Clodbuster gear cases and provide a fixed point for mounting of the upper 4-link suspension arms. Made from 1/8 thick aluminum, these have adjustable mounting points to allow for fine tuning for your suspension. All necessary installation hardware is included. | |
|
| |  These CNC machined 6061 aluminum lower 4-link bars allow for the secure mounting of both sway bars and/or shocks in a variety of locations. | |
|
| |  17 inch aluminum 60/40 4-link kit. | |
|
If you have any info and/or
photos of any discontinued ClodBuster product, please contact
me here
|
All info on this site is as accurate as possible, but mistakes are bound to happen. No guarantees are given.
Discontinued.Clod.Parts does not sell any of the products listed on this site. Discontinued.Clod.Parts is just an information collection on parts for the Clod Buster.
|
