|
Discontinued.Clod.Parts
|  |  Oil filled coilover shock system for the Clod Buster. | |
|
| |  Includes 4 Aluminum 4-link bars, 8 ball ends and hardware. | |
|
| | Kit includes 4 link bars & heavy duty ball ends, conical washers and mounting hardware. | |
|
| |  Carbon 4 link bars 13.5 inch wheel base | |
|
| |  Carbon 4 link bars 11.5 inch wheel base | |
|
| |  Lower shock mount kit (Fits All Clodbusters) | |
|
| |  CNC precision machined aluminum upper 4-link mounts for Clod Buster axles. Incorporates anti-wear cross link bushings and PIT BULL locking system stays locked in! Used to win the 2004 NR/CTPA Worlds by driver, Jerry Garland. | |
|
| |  Clod Cantilever suspension (no shocks). | |
|
| | Clod SST Triple Shock Stands (6wd). | |
|
| | Clod Triple Shock Stands (4wd). | |
|
| |  124mm (4.87iches), 137mm (5.40inches),or 165mm (6.51inches) CNC machined lower links. | |
|
| |  These Delrin plastic shock mounts-C-hub braces solve 3 problems at once. They serve as a super tough shock/cantilever mount and lower 4 link mount while also reinforcing the weakest point on the Clod Buster axle tube, the C-hub. These are the same mounts used on our Venom and V2.2 cantilever | |
|
| |  This upper 4 link mount will not twist or break under the toughest competition conditions. 5 hole adjustment for easier builds. 6061-t6 aluminum and alloy hardware. Simple to install. Sold by the pair. <BR><BR>Fully recommended by ClodParts.com | |
|
| |  The Adjustable 4-link kits is a perfect upgrade for you Gecko equipped Clodbuster. The adjustable 4-link kit is machined from 1/4" T6 6061 high quality aluminum. The kit replaces your bottom 4-links and lower shock mounting hardware by combining into a one piece unit. | |
|
| |  Hexagon 4-Links Suspension Kit (with drilled holes for shock mount) | |
|
| |  The Adjustable 4-link kits is a perfect upgrade for you Gecko equipped Clodbuster. The adjustable 4-link kit is machined from 1/4" T6 6061 high quality aluminum. The kit replaces your bottom 4-links and lower shock mounting hardware by combining into a one piece unit. | |
|
| |  These shock mounts are designed to be installed on your 4 links rods/shafts | |
|
| |  Super Clodbuster Upper 4 Link Suspension mount with hardware. Will also work with original clodbuster and plastic gearcases. | |
|
| |  Super Clodbuster MONSTER DUTY extended Wheelbase 4 link suspension(13 inch weelbase). 8 Rods (.312 inch 8mm) & Heavy Duty Rod Ends & Hardware 4 CNC machined Shock Mounts. Will also work with original clodbuster. | |
|
| |  SCT525 Bent Rods (4) for More Articulation | |
|
| | Suspension Package for SCT103 Frame. Including SCT702, SCT703-2, SCT705, SCT707, (2) SCT822. | |
|
| |  Super Clod Cantilever Kit (4 Levers and Links) (With Bearings) | |
|
| |  Cantilever Kit (4) With Bearings. | |
|
| | Cantilever Kit (4) No Bearings. | |
|
| |  Upper 4 link suspension mount requires steering servo adapter (Our 4 link suspension creates the proper arc for High Performance). | |
|
| |  Long Wheelbase (14“) 4 Link Suspension. | |
|
| |  Standard Wheelbase, 4 link suspension: 8 Rods & Heavy Duty Rodends, 4 CNC machined Shock Mounts. | |
|
| | Mounting Blocks and a long rod end to mount Stock Tamiya Suspension. | |
|
| |  Aluminum suspension arms to replace the plastic stock ones. | |
|
| |  Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 upper links mount from the chassis to our upper link mount. Links are 124mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs. | |
|
| |  Made of CNC 6061 aluminum, these mount on 1/4 or 5/16 inch links and allow easy adjustment. Set of 4. | |
|
| |  CNC machined out of aluminum, these upper link mounts fit snug and tight thanks to our proprietary anti-spin system. POLISHED to a SHOW QUALITY mirror finish! Comes as a pair with 3mm screws. | |
|
| |  Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 lower links allow for integrated shock mounting. Reduces slop. Links are 136mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs. | |
|
| |  Ultra heavy Lower Links set. | |
|
| |  This is the optional Hot Racing Aluminum Universal Upper Link Mount for the Clod Rock Clawer series. | |
|
| |  This is the optional Hot Racing Aluminum Universal Narrow Upper Link Mount for the Clod Rock Clawer series. | |
|
| |  MC Nylon upper links mount has been specially designed to fix firmly even after extreme driving | |
|
| |  Using Duralumin 7075 and thicker and stronger body, It will not be bent or broken by impacts | |
|
| | This is the cantilever kit for the Clodzilla IV. | |
|
| | Shocks are mounted inboard above the chassis for more centered weight Increases wheel travel and reduces ride height for a lower center of gravity. Parts made of aluminum. Specially designed for the CLODZILLA III full race chasis. | |
|
| |  Designed to be used exclusively with the CLODZILLA 2 chassis and Multi-Link suspension, the new CLODZILLALEVER kit incorporates a radical full floating shock design wich creates a true rising rate action in the suspension for incredible handling. A.K.A. Clodzillalever II Cantilever Kit | |
|
| |  This is the Clodzilla II long wheelbase suspension kit for the Tamiya Clodbuster and Bullhead kits. It is based on the same race technology used on the standard multi-link suspension kit. | |
|
| |  This is the multi-link suspensin kit for the Clodzilla. | |
|
| |  The ultimate in heavy-duty suspension systems, this ESP Clod Buster kit is designed to use a total of 16 oil shocks! The kit includes four upper and lower shock mounts and all necessary mounting hardware | |
|
| |  ESP's new Racing Suspension Kit has special upper and lower shock-mounting brackets that relocate the shock absorbers for a more progressive rate of travel. Designed to be used with four stock or oil shocks, the kit works particularly well with the MRC long, yellow dampers. | |
|
| |  This is ESP's popular suspension lift kit for the Tamiya Clodbuster or Bullhead. | |
|
| |  Custom suspension links made to your order! | |
|
| |  Shock mounts that attach to the top of the axle tube braces. | |
|
| |  These mount to the inside area behind the "C" hub of the axle tube. | |
|
| |  Made from 7/16" aluminum, these have a custom washer installed on the bottom and feature a locking stud that fits inside the custom washer to prevent the mount from spinning. | |
|
| |  17 inch aluminum 50/50 4-link kit. | |
|
| |  High clearance 6061 aluminum 4-link bars designed to optimize ground clearance for your crawler. | |
|
| |  Add these Terminator style skull 4-link mounts to your truck for that unique look! These mounts use the stock steering servo location and give that different look for those not wanting to run our high performance CNCd CPE-4LMTHD versions. | |
|
| |  These aluminum upper 4-link mounting brackets are a direct bolt-on to your stock Clodbuster gear cases and provide a fixed point for mounting of the upper 4-link suspension arms. Made from 1/8 thick aluminum, these have adjustable mounting points to allow for fine tuning for your suspension. All necessary installation hardware is included. | |
|
| |  These CNC machined 6061 aluminum lower 4-link bars allow for the secure mounting of both sway bars and/or shocks in a variety of locations. | |
|
| |  17 inch aluminum 60/40 4-link kit. | |
|
| |  Vertical Upper 4 Link Mounts for Tamiya Super Clodbuster | |
|
|
All info on this site is as accurate as possible, but mistakes are bound to happen. No guarantees are given.
Discontinued.Clod.Parts does not sell any of the products listed on this site. Discontinued.Clod.Parts is just an information collection on parts for the Clod Buster.
|
No info available
Shock Mounting Kit.
Suspension Stabilizers.