News
Contributors
Contact
Products
Chassis
Suspension
Hop-ups
Gears
Steering
Bearings
Wheels
Tires
Foam Inserts
Motors
Batteries
Stock Parts
Old School Parts
View by Company
If you have any info and/or photos of any discontinued ClodBuster product, please contact me here |
The VG1 is a designer chassis that changes the traditional straight lined look. The VG1 features 6mm side plates and 6mm bottom battery tray which exemplifies a mixture of beauty and brawn.
entry level V3M chassis2
The only wheel widener on the market allowing you to widen aluminum wheels by 3/4in each! CNC 6061 aluminum (can be used w/ stock hubs to mount regular wheels too!) Set of 4 w/ hardware.
Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 upper links mount from the chassis to our upper link mount. Links are 124mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs. 
Replace your thin stock tie rods with this nicely polished 1/4" set. Strong sturdy and show truck worthy. Comes as a pair (for front and rear) complete with custom rod ends and studs.
Made of CNC 6061 aluminum, these mount on 1/4 or 5/16 inch links and allow easy adjustment. Set of 4.
The ultimate rod end for your truck! CUSTOM made CNC machined aluminum rod ends similar to Kyosho (6.8mm ball 3mm hole 8-32 thread). Custom threads can also be ordered. Check out addition picture which shows it mounted on a 5/16" link!
Clod to Pirate hex converter. Now you can mount your big PIRATE wheels on your trucks! Made of CNC 6061 Aluminum for durability!! You get a set of 4 adapters and washers.
Use your stock servo mounts to mount servo to gearbox plate and attach steering rods. Converts to lockout by attaching steering rod to gear case plate! Rods equipped with 6.8mm ends & 8-32 studs
CNC machined out of aluminum, these upper link mounts fit snug and tight thanks to our proprietary anti-spin system. POLISHED to a SHOW QUALITY mirror finish! Comes as a pair with 3mm screws.
Mount your RAM lights on your bumpers in style! CNC machined mounts allow for horizontal and vertical light positions. Mounts to any 1/4" rod or spacers provided for side mounting.
Gold anodized servo plate makes your truck look like $$$$
A quick and low cost way to spice up your truck. Custom knockoffs for your wheels are CNC machined out of high quality 6061 aluminum. Available in a set of 4 in various colors!
Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 lower links allow for integrated shock mounting. Reduces slop. Links are 136mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs. 
NO MORE JB WELD! Now you can EASILY lock your diffs and easily convert back to stock. Aluminum adapters also eliminate stripping your plastic hex recesses.
Chassis is CNC machined from 6061 aluminum. The sturdy side plates also have strategically placed 3mm holes to allow various mounting positions for the radio tray. This is one beefy chassis with stunning looks and solid performance and best of all is its surprisingly light weight!
Only 30 of these limited edition chassis were produced. Each chassis comes engraved with its individual serial number. Each kit also includes a certificate of authenticity.
Super BEEFY aluminum clod bumper. CNC machined out of 6061-T6 aluminum! Click below for SUPER DETAILS!All info on this site is as accurate as possible, but mistakes are bound to happen. No guarantees are given.
Discontinued.Clod.Parts does not sell any of the products listed on this site. Discontinued.Clod.Parts is just an information collection on parts for the Clod Buster.
Discontinued.Clod.Parts does not sell any of the products listed on this site. Discontinued.Clod.Parts is just an information collection on parts for the Clod Buster.